DSPIC30F6012-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6012 |
| Pin Count | 64 |
| Lead Pitch | 650μm |
| Interface | CAN, I2C, I2S, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 4096 |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6012-30I/PF Overview
A space-saving advantage is that it is included in the 64-TQFP package. The way of mounting it is Surface Mount. Tray is the package that contains it. It is equipped with a dsPIC core processor. Work should be done at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 52 I/Os have been provided by the device. Based on the DSPIC30F6012 base part number, it can be compared with other components. A QUAD position is assigned to its terminals. 64 terminationals are present. The dsPIC? 30F series includes this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. This gadget has MICROCONTROLLER, RISC as its uPs/uCs/Peripheral IC. 64 pins are used to construct it. A total of 64 pins are attached to it. In the subcategory of Digital Signal Processors, this component is included. Memory size for the devices is 144kB, which can be used to store programs and data. This device achieves excellent efficiency at frequencies of 30MHz. In total, there are 5 timers and counters. It works with an oscillator type Internal.
DSPIC30F6012-30I/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6012-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6012-30I/PF Microcontroller applications.
- Dryers
- Electronic jamming systems
- Oil and gas
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Multi-meter
- X-ray
- Virtual reality VR robots
- Digital set-top boxes
- Traditional industrial transformation
- Oscilloscopes
