DSPIC30F6012A-20E/PF
| Parameters | |
|---|---|
| Base Part Number | DSPIC30F6012A |
| Pin Count | 64 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Supply Current-Max | 180mA |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 24 |
| Number of Programmable I/O | 68 |
| Format | FIXED-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.8mm |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
DSPIC30F6012A-20E/PF Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. It is available in the Tray package. A dsPIC core processor powers the device. Work should be performed at a temperature of -40°C~125°C TA. It has a type of program memory of FLASH. 52 I/Os can be found on it. It has a base part number of DSPIC30F6012A that can be used to find other components that are comparable. At QUAD, it has its terminals. It has 64 terminationals. dsPIC? 30F is the series number of this electrical component. This is due to the fact that the supply voltage is 5V, resulting in high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 64 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. This device has a total of 64 pins. The component is included in Digital Signal Processors. Memory size for the devices is 144kB, which can be used to store programs and data. The maximum supply current is set at 180mA. Using a frequency of 20MHz, it is very efficient. 5 timers/counters are in use. The number 68 represents the number of programmable I/O ports on the board. Using an oscillator type of Internal, it works.
DSPIC30F6012A-20E/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6012A-20E/PF Applications
There are a lot of Microchip Technology DSPIC30F6012A-20E/PF Microcontroller applications.
- Auto-breaking system
- Toasters
- Digital set-top boxes
- Entertainment products
- Projectors
- Industrial instrumentation devices
- Dryers
- Instrument control
- Multi-meter
- Air fryers
