DSPIC30F6012A-20E/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6012A |
| Pin Count | 64 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6012A-20E/PT Overview
For space savings, it is available in the 64-TQFP package. Surface Mount is the way to mount it. It comes in a Tray package. A dsPIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~125°C TA. FLASH is its program memory type. A total of 52 I/Os are present. Based on its base part number of DSPIC30F6012A, other similarly-sized components can be found. At QUAD, its terminals are located. As far as terminations are concerned, there are 64 terminations present. There are a number of electrical components in the dsPIC? 30F series, including this one. The supply voltage of 5V allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. The structure is composed of 64 pins. According to Surface Mount, it is mounted. It has a total of 64 pins on it. In Digital Signal Processors, this component is included. The devices have a memory size of 144kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 20MHz. While deploying 5.5V, designers will be able to fully take advantage of its adaptability. A total of 5 timers/counters are present. Using oscillator type Internal makes it work.
DSPIC30F6012A-20E/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6012A-20E/PT Applications
There are a lot of Microchip Technology DSPIC30F6012A-20E/PT Microcontroller applications.
- Kindle
- Electromechanical control
- Fax machines
- Security systems
- Ipod
- Teletext terminals
- Hard drives
- Oscilloscopes
- Computed Tomography (CT scan)
- Television
