DSPIC30F6012A-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6012A |
| Pin Count | 64 |
| Operating Supply Voltage | 5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 52 |
| Nominal Supply Current | 74mA |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6012A-30I/PF Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. Surface Mount is used for mounting. You can find it in the package of Tray. With a processor of dsPIC cores, the device is powered. Work should be done at -40°C~85°C TA. It has a type of program memory of FLASH. 52 I/Os have been provided by the device. A comparable component can be found by using the base part number DSPIC30F6012A. The terminals are positioned at QUAD. It has 64 terminationals. It is a member of the dsPIC? 30F series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. 64 pins are used to construct it. The method of Surface Mount is used to mount it. This device has a total of 64 pins. It falls under the category of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 144kB. It performs extremely well at a frequency of 30MHz. When 5V is employed, designers can fully utilize its adaptability and supply voltage. In total, there are 5 timers and counters. An oscillator of type Internal is used.
DSPIC30F6012A-30I/PF Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6012A-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6012A-30I/PF Microcontroller applications.
- Heater/Fan
- Embedded gateways
- Ipad
- Radio
- Automatic staplers
- Virtual reality VR robots
- Gas monitoring systems
- Instrument control
- Christmas lights
- Home appliances
