DSPIC30F6013-20I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6013 |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 3072 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC30F6013-20I/PF Overview
There is a 80-TQFP package available to save space. A Surface Mount mounting method is used. In the package Tray, it is included. There is a dsPIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. The type of memory in which this program is stored is FLASH. 68 I/Os have been provided by the device. A component with the same part number as DSPIC30F6013 can be compared to other similar components. The terminals of this device are located at QUAD. There are a total of 80 terminations in it. It is a member of the dsPIC? 30F series of electrical components. Because the supply voltage is 5V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER, RISC. For its construction, 80 pins are used. On it, there are 80 pins. Digital Signal Processors contains this component. Data and programs can be stored on the devices with a memory size of 132kB. The system is highly efficient when working at a frequency of 20MHz. In total, there are 5 timers and counters. Using oscillator type Internal makes it work.
DSPIC30F6013-20I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6013-20I/PF Applications
There are a lot of Microchip Technology DSPIC30F6013-20I/PF Microcontroller applications.
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Light sensing & controlling devices
- Hard drives
- Fire alarms
- Coffee machines
- Oscilloscopes
- Robots
- Smart instruments
- Robotic prosthetic limbs
- Smartphone
