DSPIC30F6013A-20E/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6013A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 6144 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6013A-20E/PF Overview
There is an option to purchase it in the 80-TQFP package, which saves space. It is mounted using the way of Surface Mount. A package of Tray contains it. With a processor of dsPIC cores, the device is powered. In order to work effectively, the temperature should be kept at -40°C~125°C TA. There is FLASH program memory in it. It has a number of 68I/Os. It has a base part number of DSPIC30F6013A that can be used to find other components that are comparable. At QUAD, its terminals are located. There are a total of 80 terminations in it. dsPIC? 30F is the series number of this electrical component. Because the supply voltage is 5V, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. 80 pins are used to construct it. The mounting of this device is carried out following the method of Surface Mount. A total of 80 pins are attached to it. Subcategory Digital Signal Processors includes this component. Memory size for the devices is 132kB, which can be used to store programs and data. At a frequency of 20MHz, it can achieve excellent efficiency. A total of 5 timers/counters have been set up. The oscillator type Internal is used to operate the device.
DSPIC30F6013A-20E/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6013A-20E/PF Applications
There are a lot of Microchip Technology DSPIC30F6013A-20E/PF Microcontroller applications.
- Digital set-top boxes
- Dishwashers
- Food and beverage
- Blenders
- Mobile computers
- Instrument control
- Kindle
- Coffee machines
- Oscilloscopes
- Robotic prosthetic limbs
