DSPIC30F6013A-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6013A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 6144 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6013A-30I/PF Overview
For the purpose of saving space, it is available in the 80-TQFP package. This is mounted using the Surface Mount method. This item can be found in package Tray. The device runs in dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Memory type FLASH is used for program memory. It has a number of 68I/Os. Based on its base part number of DSPIC30F6013A, other similarly-sized components can be found. At QUAD, its terminals are located. There are a total of 80 terminations in it. Part of the dsPIC? 30F series, this electrical component is used in a variety of applications. By using a 5V voltage supply, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER, RISC. A total of 80 pins are required to construct this device. According to Surface Mount, it is mounted. There are a total of 80 pins on it. This component is a part of Digital Signal Processors. A device with a memory size of 132kB can store programs and data. Working at a frequency of 30MHz results in excellent efficiency. The number of timers and counters is 5. An oscillator type Internal is required for it to work.
DSPIC30F6013A-30I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6013A-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6013A-30I/PF Microcontroller applications.
- Instrument control
- Toasters
- Wastewater treatment
- Computer/laptop
- Computed Tomography (CT scan)
- Heart rate monitors
- Washing machine
- Speed meter
- Fire alarms
- Process control devices
