DSPIC30F6013A-30I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6013A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 1 Mb |
| EEPROM Size | 2K x 8 |
| Number of A/D Converters | 1 |
| Format | FIXED-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 8 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6013A-30I/PT Overview
To save space, it is included in the 80-TQFP package. Mounted using Surface Mount. In the package Tray, it is included. It is equipped with a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. The device has 68 I/Os. A component with the same part number as DSPIC30F6013A can be compared to other similar components. The terminals of this device are set to QUAD. It consists of 80 terminationals. The dsPIC? 30F series contains this electrical component. Because of the 5V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER, RISC for its uPs, uC, and peripheral ICs. There are 80 pins used in the construction of this device. According to Surface Mount, it is mounted. In total, it has 80 pins. Digital Signal Processors contains this component. It is possible to store programs and data on the devices, as they have a memory size of 132kB. It is highly efficient when it works at a frequency of 30MHz. The number of timers and counters is 5. The oscillator type Internal is used to operate the device.
DSPIC30F6013A-30I/PT Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6013A-30I/PT Applications
There are a lot of Microchip Technology DSPIC30F6013A-30I/PT Microcontroller applications.
- Torpedo guidance
- Leakage current tester
- Current meter
- Oil and gas
- Electromechanical control
- Smartphone
- Data acquisition and control
- Gas monitoring systems
- Washing machines
- Refrigerators
