DSPIC30F6013AT-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2005 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6013A |
| Pin Count | 80 |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 132kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 132KB 44K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 2K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 6144 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6013AT-30I/PF Overview
It is available in the 80-TQFP package for the benefit of saving space. It is mounted using the way of Surface Mount. It comes in a Tape & Reel (TR) package. Devices with dsPIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 68 I/Os on it. Based on the DSPIC30F6013A base part number, it can be compared with other components. At QUAD, it has its terminals. It has 80 terminationals. In the dsPIC? 30F series, this electrical component is found. High efficiency is possible due to the 5V supply voltage. In this gadget, MICROCONTROLLER, RISC is the device's uPs/uCs/Peripheral IC. It is constructed with 80 pins. As a result, it is mounted in accordance with Surface Mount. On it, there are 80 pins. This component is a part of Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 132kB. At a frequency of 30MHz, it can achieve excellent efficiency. There are currently 5 timers/counters set up on the system. Using an oscillator type of Internal, it works.
DSPIC30F6013AT-30I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6013AT-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6013AT-30I/PF Microcontroller applications.
- Dishwashers
- Leakage current tester
- DCS control intelligent sensor
- X-ray
- Measuring revolving objects
- Hand-held metering systems
- Graphic terminals
- Smart instruments
- Volt meter
- Toasters
