DSPIC30F6014-20E/PF
| Parameters | |
|---|---|
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6014 |
| Pin Count | 80 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, I2S, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 4096 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2004 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | ALSO OPERATES AT 3V MINIMUM SUPPLY AT 10 MHZ |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
DSPIC30F6014-20E/PF Overview
It is available in the 80-TQFP package for the benefit of saving space. This is mounted using the Surface Mount method. It comes in a Tray package. The device runs in dsPIC core processor. Working at -40°C~125°C TA temperature is recommended. It has a type of program memory of FLASH. A total of 68 I/Os are present. A comparable component can be found by using the base part number DSPIC30F6014. The position of the device is QUAD at terminal. In this case, there are 80 terminationals. The dsPIC? 30F series contains this electrical component. High efficiency is possible due to the 5V supply voltage. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. There are 80 pins used in the construction of this device. Total number of pins is 80. This is a component included in Digital Signal Processors. A device with a memory size of 144kB can store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. While employing 5.5V, designers can maximize its supply voltage adaptability. There are 5 timers/counters. There is also the property of ALSO OPERATES AT 3V MINIMUM SUPPLY AT 10 MHZ. Using an oscillator type Internal, it operates.
DSPIC30F6014-20E/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6014-20E/PF Applications
There are a lot of Microchip Technology DSPIC30F6014-20E/PF Microcontroller applications.
- Coffee machines
- Television
- Ipod
- Electronic jamming systems
- Home appliances
- Projectors
- Smart highways (navigation, traffic control, information monitoring and car service)
- Wastewater treatment
- Instrument control
- Computed Tomography (CT scan)
