DSPIC30F6014-20I/PF
| Parameters | |
|---|---|
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Surface Mount | YES |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2006 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| Termination | SMD/SMT |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 20MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6014 |
| Pin Count | 80 |
| Lead Pitch | 650μm |
| Row Spacing | 16 mm |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Density | 1.1 Mb |
| EEPROM Size | 4K x 8 |
| Format | FIXED-POINT |
| RAM (words) | 4096 |
| Number of ADC Channels | 16 |
| Number of I2C Channels | 1 |
| Number of SPI Channels | 2 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC30F6014-20I/PF Overview
As a result, it is available in the 80-TQFP package. A Surface Mount mounting method is used. Tray is the package that contains it. It is equipped with a dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. FLASH is its program memory type. It has a number of 68I/Os. A component with the same part number as DSPIC30F6014 can be compared to other similar components. The terminals of this device are set to QUAD. 80 terminationals are present. In the dsPIC? 30F series, this electrical component is found. Using the 5V supply voltage allows for high efficiency. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER, RISC in order to monitor their performance. For its construction, 80 pins are used. It has a total of 80 pins on it. It falls under the category of Digital Signal Processors. Memory size for the devices is 144kB, which can be used to store programs and data. When working at a frequency of 20MHz it is able to achieve excellent efficiency. In total, there are 5 timers and counters. Using a Internal oscillator type, it works well.
DSPIC30F6014-20I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6014-20I/PF Applications
There are a lot of Microchip Technology DSPIC30F6014-20I/PF Microcontroller applications.
- Firewalls
- Torpedo guidance
- Hard drives
- Computers and laptops-video calling, email, blogging
- Blood pressure monitors
- Home appliances
- Christmas lights
- Magnetic resonance imaging (MRI)
- Accu-check
- Smart instruments
