DSPIC30F6014AT-30I/PF
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 80-TQFP |
| Number of Pins | 80 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| Series | dsPIC™ 30F |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 80 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 5V |
| Frequency | 30MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC30F6014A |
| Pin Count | 80 |
| Operating Supply Voltage | 5.5V |
| Interface | CAN, I2C, SPI, UART, USART |
| Memory Size | 144kB |
| Oscillator Type | Internal |
| Number of I/O | 68 |
| RAM Size | 8K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2.5V~5.5V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER, RISC |
| Core Processor | dsPIC |
| Peripherals | AC'97, Brown-out Detect/Reset, I2S, LVD, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 144KB 48K x 24 |
| Connectivity | CANbus, I2C, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | NO |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| EEPROM Size | 4K x 8 |
| On Chip Program ROM Width | 24 |
| Format | FIXED-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1.2mm |
| Length | 14mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC30F6014AT-30I/PF Overview
A space-saving advantage is that it is included in the 80-TQFP package. Using Surface Mount, it is mounted. You can find it in the package of Tape & Reel (TR). Device with dsPIC core processor issupported. In order to work effectively, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. There are 68 I/Os on it, which makes it a very simple device. To find equivalent components, use its DSPIC30F6014A base part number. The position of the device is QUAD at terminal. In this case, there are 80 terminationals. There are a number of electrical components in the dsPIC? 30F series, including this one. By using a 5V voltage supply, high efficiency is possible. It has uPs/uCs/Peripheral IC - MICROCONTROLLER, RISC. A total of 80 pins are required to construct this device. The method of Surface Mount is used to mount it. This device has a total of 80 pins. It is one of the components included in Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 144kB. At a frequency of 30MHz, it can achieve excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 5.5V in their designs. In total, there are 5 timers and counters. Internal is the oscillator type it uses.
DSPIC30F6014AT-30I/PF Features
80-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC30F6014AT-30I/PF Applications
There are a lot of Microchip Technology DSPIC30F6014AT-30I/PF Microcontroller applications.
- Virtual reality VR robots
- Wastewater treatment
- Gas monitoring systems
- Embedded gateways
- Multi-meter
- Washing machines
- Digital set-top boxes
- Fax machines
- Printers
- Aerospace navigation systems
