DSPIC33EP128GM304-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Additional Feature | 70 MIPS, ADC ALSO SUPPORTS 10-BIT RESOLUTION |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128GM304 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Supply Current-Max | 60mA |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Format | FLOATING-POINT |
| Number of UART Channels | 4 |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP128GM304-I/PT Overview
Due to the benefits of saving space, it is available in the 44-TQFP package. It is mounted using the way of Surface Mount. Package Tray contains it. With a processor of dsPIC cores, the device is powered. When working, it is recommended that the temperature be kept at -40°C~85°C TA. In terms of its program memory type, it is FLASH. 35 I/Os are present on the device. Based on its base part number of DSPIC33EP128GM304, other similarly-sized components can be found. The terminals are positioned at QUAD. Currently, it consists of 44 terminationals. This electrical component is part of the dsPIC? 33EP series. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. 44 pins are used to construct it. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. It should be noted that 60mA represents the maximum supply current. This device works well at 70MHz frequency when it is operating at a high rate of efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. It appears that there are 13 timers/counters in use. It has the property of 70 MIPS, ADC ALSO SUPPORTS 10-BIT RESOLUTION as well. Internal is the oscillator type it uses.
DSPIC33EP128GM304-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128GM304-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP128GM304-I/PT Microcontroller applications.
- Entertainment products
- Robots
- Coffee machines
- Torpedo guidance
- Smart highways (navigation, traffic control, information monitoring and car service)
- Aerospace navigation systems
- Scanners
- Traditional industrial transformation
- Information appliances (networking of household appliances)
- Keyboards
