DSPIC33EP128GM604-E/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | Automotive, AEC-Q100, dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128GM604 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 60 MIPs |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Clock Frequency | 60MHz |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Supply Current-Max | 50mA |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| ROM (words) | 131072 |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Number of ADC Channels | 18 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP128GM604-E/ML Overview
For space savings, it is available in the 44-VQFN Exposed Pad package. Surface Mount is the way to mount it. Tube is the package that contains it. Device with dsPIC core processor issupported. When working, the temperature should be kept at -40°C~125°C TA. The type of memory in which this program is stored is FLASH. A total of 35 I/Os are available on this device. To find comparable components, use the DSPIC33EP128GM604 base part number. The terminals are positioned at QUAD. In this case, there are 44 terminationals. Part of the Automotive, AEC-Q100, dsPIC? 33EP series, this electrical component is used in a variety of applications. Using the 3.3V supply voltage allows for high efficiency. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 44 pins are used to construct it. It belongs to the subcategory Digital Signal Processors. The maximum supply current is set at 50mA. Power is provided by a source of 3.3V. In the device, the clock runs at a frequency of 60MHz. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. The oscillator type Internal is used to operate the device.
DSPIC33EP128GM604-E/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128GM604-E/ML Applications
There are a lot of Microchip Technology DSPIC33EP128GM604-E/ML Microcontroller applications.
- Paper shredders
- Embedded gateways
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Robots
- Accu-check
- Virtual reality VR robots
- Printers
- Smart instruments
- DVD\DV\MP3 players
- Computer/laptop
