DSPIC33EP128GM604-I/PT
| Parameters | |
|---|---|
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Max Frequency | 140MHz |
| Format | FLOATING-POINT |
| Number of UART Channels | 4 |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2013 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128GM604 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.6V |
| Interface | I2C, SPI, UART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 70 MIPs |
| RAM Size | 16K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Supply Current-Max | 60mA |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Has ADC | YES |
DSPIC33EP128GM604-I/PT Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. Package Tray contains it. A core processor of dsPIC is present in the device. Work should be done at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 35 I/Os on the board. Based on the DSPIC33EP128GM604 base part number, it can be compared with other components. The terminals of this device are set to QUAD. In this case, there are 44 terminationals. The dsPIC? 33EP series contains this electrical component. It is possible to achieve high efficiency with a 3.3V supply voltage. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. It is constructed using 44 pins. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 128kB which may be used to store programs and data. Supply current is maximum at 60mA. The supply voltage of 3.6V's adaptability can be fully utilised by designers. A total of 13 timers/counters have been set up. 140MHz is the maximum frequency at which the device operates. Using an oscillator type Internal, it operates.
DSPIC33EP128GM604-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128GM604-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP128GM604-I/PT Microcontroller applications.
- X-ray
- Calculators
- Leakage current tester
- Walkie talkies
- Process control devices
- Tape drives
- Set-top boxes
- Safety -airbags, automatic braking system (ABS)
- Mice
- Fax machines
