DSPIC33EP128GP502-I/SP
| Parameters | |
|---|---|
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | DSPIC33EP128GP502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
DSPIC33EP128GP502-I/SP Overview
It is available in the 28-DIP (0.300, 7.62mm) package for the benefit of saving space. Through Hole is used for mounting. You can find it in the package of Tube. A dsPIC core processor powers the device. When working, the temperature should be kept at -40°C~85°C TA. The type of memory it uses is FLASH. It has a number of 21I/Os. To find comparable components, use the DSPIC33EP128GP502 base part number. The terminals are positioned at DUAL. There are a total of 28 terminations in it. In the dsPIC? 33EP series, this electrical component is found. As a result of the 3.3V supply voltage, high efficiency is possible. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 28 pins are used to construct it. On it, there are 28 pins. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. This device achieves excellent efficiency at frequencies of 70MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. The number of timers and counters is 5. The oscillator type Internal is used to operate the device.
DSPIC33EP128GP502-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33EP128GP502-I/SP Applications
There are a lot of Microchip Technology DSPIC33EP128GP502-I/SP Microcontroller applications.
- Digital cameras
- Missile control
- Wastewater treatment
- Temperature sensing and controlling devices
- Smart highways (navigation, traffic control, information monitoring and car service)
- Digital TVs
- Torpedo guidance
- Virtual reality VR robots
- Television
- Fire alarms
