DSPIC33EP128GP506-I/MR
| Parameters | |
|---|---|
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 43690 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 8192 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
DSPIC33EP128GP506-I/MR Overview
A space-saving advantage is that it is included in the 64-VFQFN Exposed Pad package. In this case, it is mounted using the method of Surface Mount. It comes in a Tube package. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. The type of memory in which this program is stored is FLASH. It has a number of 53I/Os. A comparable component can be found by using the base part number DSPIC33EP128GP506. A QUAD position is assigned to its terminals. This circuit consists of 64 terminationals. The dsPIC? 33EP series includes this electrical component. Because of the 3.3V voltage of the supply, high efficiency can be achieved. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A total of 64 pins are used in its construction. There are 64 pins on it. It falls under the category of Digital Signal Processors. Data and programs may be stored on the devices which have a memory size of 128kB. Working at a frequency of 70MHz results in excellent efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. A total of 5 timers/counters have been set up. An oscillator of type Internal is used.
DSPIC33EP128GP506-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128GP506-I/MR Applications
There are a lot of Microchip Technology DSPIC33EP128GP506-I/MR Microcontroller applications.
- Virtual reality VR robots
- Calculators
- Magnetic resonance imaging (MRI)
- Measuring revolving objects
- Heart rate monitors
- Switches
- Nintendo
- Automatic control
- Process control devices
- Medical instruments chromatographs
