DSPIC33EP128MC504-I/ML
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128MC504 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 10mA |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 8mm |
| Width | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP128MC504-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. In this case, it is mounted using the method of Surface Mount. Tube is the package that contains it. Devices with dsPIC core processors are available. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. A total of 35 I/Os are available on this device. It has a part number of DSPIC33EP128MC504 that can be used to locate similar components. The terminals are positioned at QUAD. In this case, there are 44 terminationals. Part of the dsPIC? 33EP series, this electrical component is used in a variety of applications. Because the supply voltage is 3.3V, high efficiency can be achieved. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A total of 44 pins are required to construct this device. This device has a total of 44 pins. It is one of the components included in Digital Signal Processors. Using the devices' 128kB memory size, you can store programs and data. When working at a frequency of 70MHz it is able to achieve excellent efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 5 timers/counters are in use. An oscillator type Internal is required for it to work.
DSPIC33EP128MC504-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128MC504-I/ML Applications
There are a lot of Microchip Technology DSPIC33EP128MC504-I/ML Microcontroller applications.
- Smoke alarms
- Washing machines
- Temperature sensing and controlling devices
- Refrigerators
- Virtual reality VR robots
- Instrument control
- Dryers
- Security systems
- Heater/Fan
- Embedded gateways
