DSPIC33EP128MC504-I/PT
| Parameters | |
|---|---|
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128MC504 |
| Pin Count | 44 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 10mA |
| RAM Size | 8K x 16 |
DSPIC33EP128MC504-I/PT Overview
There is an option to purchase it in the 44-TQFP package, which saves space. In this case, it is mounted using the method of Surface Mount. It is available in the Tray package. Device with dsPIC core processor issupported. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. A total of 35 I/Os are available on this device. In order to find similar components, it has a base part number of DSPIC33EP128MC504. QUAD is the position of its terminals on the board. It has 44 terminationals. This electrical component is part of the dsPIC? 33EP series. By using a 3.3V voltage supply, high efficiency is possible. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. For its construction, 44 pins are used. It is equipped with 44 pins in total. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. A 3.3V source is used for powering it. The system is highly efficient when working at a frequency of 70MHz. There are 5 timers/counters. Normally, the supply voltage (Vsup) should remain above 3V. Using oscillator type Internal makes it work.
DSPIC33EP128MC504-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128MC504-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP128MC504-I/PT Microcontroller applications.
- Dryers
- Microwave ovens
- Graphic terminals
- Speed meter
- Air fryers
- Industrial robot
- Teletext terminals
- Leakage current tester
- Entertainment products
- Automatic control
