DSPIC33EP128MC506-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128MC506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 10mA |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP128MC506-I/MR Overview
To save space, it is included in the 64-VFQFN Exposed Pad package. Using Surface Mount, it is mounted. There is a Tube package available for it. With a processor of dsPIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. Its type of program memory is FLASH. A total of 53 I/Os are available on this device. Other components that are comparable to it have the base part number DSPIC33EP128MC506. At QUAD, its terminals are located. 64 terminations are present in it. The electrical component is part of the series dsPIC? 33EP. High efficiency is possible due to the 3.3V supply voltage. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. The structure is composed of 64 pins. There are 64 pins on it. Digital Signal Processors contains this component. The devices have a maximum memory size of 128kB that can be used to store programs and data. This device works well at 70MHz frequency when it is operating at a high rate of efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. There are currently 5 timers/counters set up on the system. Internal is the oscillator type it uses.
DSPIC33EP128MC506-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128MC506-I/MR Applications
There are a lot of Microchip Technology DSPIC33EP128MC506-I/MR Microcontroller applications.
- Auto-breaking system
- Data acquisition and control
- Medical instruments chromatographs
- Hearing aids
- Calculator
- Television
- Teletext terminals
- Fire alarms
- Instrument control
- Washing machines
