DSPIC33EP128MC506-I/PT
| Parameters | |
|---|---|
| Packaging | Tray |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP128MC506 |
| Pin Count | 64 |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 128kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 10mA |
| RAM Size | 8K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 128KB 43K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 1 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
DSPIC33EP128MC506-I/PT Overview
There is an option to purchase it in the 64-TQFP package, which saves space. This is mounted using the Surface Mount method. You can find it in the package of Tray. There is a dsPIC as core processor in this device. Work should be done at -40°C~85°C TA. The type of memory it uses is FLASH. A total of 53 I/Os are present. In order to find similar components, it has a base part number of DSPIC33EP128MC506. QUAD is the position of its terminals on the board. This circuit consists of 64 terminationals. This electrical component is part of the dsPIC? 33EP series. By using a 3.3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. For its construction, 64 pins are used. 64 pins are on it in total. In Digital Signal Processors, this component is included. Data and programs may be stored on the devices which have a memory size of 128kB. There is a source of power of 3.3V that powers this device. It performs extremely well at a frequency of 70MHz. It appears that there are 5 timers/counters in use. In order to ensure normal operation, the supply voltage (Vsup) must remain above 3V. An oscillator type Internal is required for it to work.
DSPIC33EP128MC506-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP128MC506-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP128MC506-I/PT Microcontroller applications.
- Entertainment-radios, CD players, televisions
- Automatic control
- Information appliances (networking of household appliances)
- Magnetic resonance imaging (MRI)
- Sonography (Ultrasound imaging)
- Medical instruments chromatographs
- Current meter
- Aerospace navigation systems
- Vacuum cleaners
- DVD\DV\MP3 players
