DSPIC33EP256GM604-I/ML
| Parameters | |
|---|---|
| Number of I/O | 35 |
| Speed | 70 MIPs |
| RAM Size | 32K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Clock Frequency | 60MHz |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Supply Current-Max | 60mA |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| On Chip Program ROM Width | 8 |
| Screening Level | TS 16949 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Number of ADC Channels | 18 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2013 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256GM604 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Oscillator Type | Internal |
DSPIC33EP256GM604-I/ML Overview
There is a 44-VQFN Exposed Pad package available to save space. Surface Mount is the way to mount it. A package of Tube contains it. The device runs in dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. There are 35 I/Os on it. A component with the same part number as DSPIC33EP256GM604 can be compared to other similar components. This device has terminals at QUAD. This circuit consists of 44 terminationals. The electrical component is part of the series dsPIC? 33EP. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. A total of 44 pins are used in its construction. Subcategory Digital Signal Processors includes this component. It should be noted that 60mA represents the maximum supply current. There is a source of power of 3.3V that powers this device. 60MHz is the frequency of the device's clock. Normally, the supply voltage (Vsup) should remain above 3V. Internal is the oscillator type it uses.
DSPIC33EP256GM604-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256GM604-I/ML Applications
There are a lot of Microchip Technology DSPIC33EP256GM604-I/ML Microcontroller applications.
- Set-top boxes
- Removable disks
- Gas monitoring systems
- Calculator
- Automatic control
- Torpedo guidance
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Magnetic resonance imaging (MRI)
- Industrial instrumentation devices
- Smartphones-calling, video calling, texting, email
