DSPIC33EP256GP502-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256GP502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256GP502-I/MM Overview
For space savings, it is available in the 28-VQFN Exposed Pad package. Surface Mount is used for mounting. This item can be found in package Tube. It is equipped with a dsPIC core processor. In order to work effectively, the temperature should be kept at -40°C~85°C TA. FLASH is the type of program memory used by it. There are 21 I/Os on it. Based on its base part number of DSPIC33EP256GP502, other similarly-sized components can be found. QUAD is the position of its terminals on the board. A 28 termination is contained within it. dsPIC? 33EP is the series number of this electrical component. Using the 3.3V supply voltage allows for high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. The structure is composed of 28 pins. There are 28 pins on it. It is one of the components included in Digital Signal Processors. A device with a memory size of 256kB can store programs and data. At a frequency of 70MHz, it can achieve excellent efficiency. While deploying 3.3V, designers will be able to fully take advantage of its adaptability. 5 timer/counters are present. An oscillator type Internal is required for it to work.
DSPIC33EP256GP502-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256GP502-I/MM Applications
There are a lot of Microchip Technology DSPIC33EP256GP502-I/MM Microcontroller applications.
- Scanners
- Electromechanical control
- Industrial instrumentation devices
- Digital TVs
- Projector
- Walkie talkies
- Current meter
- Microwave ovens
- Automatic staplers
- Traditional industrial transformation
