DSPIC33EP256GP502-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | Not Applicable |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | DSPIC33EP256GP502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Length | 34.671mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256GP502-I/SP Overview
Due to its space-saving qualities, it is available in the 28-DIP (0.300, 7.62mm) package. Through Hole is the way to mount it. You can find it in the package of Tube. With a processor of dsPIC cores, the device is powered. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. The device has 21 I/Os. To find equivalent components, use its DSPIC33EP256GP502 base part number. DUAL is the position of its terminals on the board. As far as terminations are concerned, there are 28 terminations present. In the dsPIC? 33EP series, this electrical component is found. High efficiency is possible due to the 3.3V supply voltage. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. A total of 28 pins are attached to it. This component is a part of Digital Signal Processors. In the device, there is a memory capacity of 256kB which may be used to store programs and data. When working at a frequency of 70MHz it is able to achieve excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. 5 timer/counters are present. Using an oscillator type of Internal, it works.
DSPIC33EP256GP502-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33EP256GP502-I/SP Applications
There are a lot of Microchip Technology DSPIC33EP256GP502-I/SP Microcontroller applications.
- Electrocardiogram (EKG)
- Fire alarms
- Communication-bluetooth, Wi-Fi, radio
- Computer/laptop
- Measuring revolving objects
- DDC control
- Temperature sensing and controlling devices
- Process control devices
- Guidance-GPS
- Missile control
