DSPIC33EP256GP504-I/ML
| Parameters | |
|---|---|
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256GP504 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1mm |
| Length | 8mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2009 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
DSPIC33EP256GP504-I/ML Overview
To save space, it is included in the 44-VQFN Exposed Pad package. Surface Mount is used for mounting. Package Tube contains it. It is equipped with a dsPIC core processor. The temperature should be kept at -40°C~85°C TA while working. Memory type FLASH is used for program memory. It has a number of 35I/Os. A component with the same part number as DSPIC33EP256GP504 can be compared to other similar components. The terminals of this device are located at QUAD. 44 terminations are present in it. The dsPIC? 33EP series includes this electrical component. By using a 3.3V voltage supply, high efficiency is possible. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. The structure is constructed from 44 pins. This device has a total of 44 pins. It falls under the category of Digital Signal Processors. In the device, there is a memory capacity of 256kB which may be used to store programs and data. Working at a frequency of 70MHz results in excellent efficiency. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. There are currently 5 timers/counters set up on the system. Using an oscillator type Internal, it operates.
DSPIC33EP256GP504-I/ML Features
44-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256GP504-I/ML Applications
There are a lot of Microchip Technology DSPIC33EP256GP504-I/ML Microcontroller applications.
- Teletext terminals
- Automatic staplers
- Switches
- Instrument control
- Safety -airbags, automatic braking system (ABS)
- Digital TVs
- Telephone sets
- Tape drives
- Aerospace navigation systems
- Graphic terminals
