DSPIC33EP256GP506-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256GP506-I/MR Overview
It is available in the 64-VFQFN Exposed Pad package for the benefit of saving space. It is mounted using the way of Surface Mount. There is a Tube package available for it. A dsPIC core processor powers the device. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. The device has 53 I/Os. Other components that are comparable to it have the base part number DSPIC33EP256GP506. QUAD is the location of its terminals. 64 terminationals are present. An electrical component such as this is included in the series dsPIC? 33EP. It is possible to achieve high efficiency with a 3.3V supply voltage. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. A number of 64 pins are used to construct it. It has a total of 64 pins on it. The component is included in Digital Signal Processors. Using the devices' 256kB memory size, you can store programs and data. This device works well at 70MHz frequency when it is operating at a high rate of efficiency. While employing 3.3V, designers can maximize its supply voltage adaptability. It appears that there are 5 timers/counters in use. An oscillator type Internal is required for it to work.
DSPIC33EP256GP506-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256GP506-I/MR Applications
There are a lot of Microchip Technology DSPIC33EP256GP506-I/MR Microcontroller applications.
- Leakage current tester
- Robots
- Light sensing & controlling devices
- Medical instruments chromatographs
- Answering machines
- Petrochemical
- Digital TVs
- Ipad
- Smoke alarms
- Process control devices
