DSPIC33EP256GP506-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256GP506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256GP506-I/PT Overview
A space-saving advantage is that it is included in the 64-TQFP package. In this case, it is mounted using the method of Surface Mount. Package Tray contains it. A dsPIC core processor powers the device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH is its program memory type. It has a number of 53I/Os. A component with the same part number as DSPIC33EP256GP506 can be compared to other similar components. The terminals of this device are set to QUAD. A 64 termination is contained within it. This electrical component is part of the dsPIC? 33EP series. Because of the 3.3V voltage of the supply, high efficiency can be achieved. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A total of 64 pins are used in its construction. There are a total of 64 pins on it. It falls under the category of Digital Signal Processors. The devices have a memory size of 256kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 70MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. In total, there are 5 timers and counters. It works with an oscillator type Internal.
DSPIC33EP256GP506-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256GP506-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP256GP506-I/PT Microcontroller applications.
- Instrument control
- Ipod
- Blenders
- Calculators
- Entertainment products
- Mice
- Fax machines
- Heart rate monitors
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Heater/Fan
