DSPIC33EP256MC504-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256MC504 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1.2mm |
| Length | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256MC504-I/PT Overview
Due to its space-saving qualities, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. Tray is the package that contains it. There is a dsPIC as core processor in this device. During work, the temperature should remain at -40°C~85°C TA. FLASH has been assigned to it as a program memory. The device has 35 I/Os. Based on the DSPIC33EP256MC504 base part number, it can be compared with other components. The terminals of this device are located at QUAD. In this case, there are 44 terminationals. An electrical component such as this is included in the series dsPIC? 33EP. High efficiency is possible due to the 3.3V supply voltage. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. The structure is constructed from 44 pins. There are a total of 44 pins on it. Subcategory Digital Signal Processors includes this component. The devices have a memory size of 256kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 70MHz. A designer is able to make full use of the adaptability and supply voltage of 3.3V by using it. A total of 5 timers/counters have been set up. Using oscillator type Internal makes it work.
DSPIC33EP256MC504-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MC504-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP256MC504-I/PT Microcontroller applications.
- Smart highways (navigation, traffic control, information monitoring and car service)
- Set-top boxes
- Information appliances (networking of household appliances)
- Temperature sensing and controlling devices
- Washing machines
- Instrument control
- Entertainment-radios, CD players, televisions
- Smartphones-calling, video calling, texting, email
- Missile control
- Firewalls
