DSPIC33EP256MC506-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256MC506 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 10mA |
| RAM Size | 16K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| Density | 2 Mb |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 16384 |
| Height Seated (Max) | 1mm |
| Length | 9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP256MC506-I/MR Overview
Due to the benefits of saving space, it is available in the 64-VFQFN Exposed Pad package. The way of Surface Mount is used to mount it. Package Tube contains it. Device with dsPIC core processor issupported. Work should be done at -40°C~85°C TA. Memory type FLASH is used for program memory. 53 I/Os can be found on it. To find equivalent components, use its DSPIC33EP256MC506 base part number. QUAD is the position of its terminals on the board. Currently, it consists of 64 terminationals. In the dsPIC? 33EP series, this electrical component is found. Because the supply voltage is 3.3V, high efficiency can be achieved. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. The structure is composed of 64 pins. There are a total of 64 pins on it. It falls under the category of Digital Signal Processors. The devices have a memory size of 256kB that can be used to store programs and data. Using a frequency of 70MHz, it is very efficient. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. There are 5 timers/counters. Using an oscillator type Internal, it operates.
DSPIC33EP256MC506-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MC506-I/MR Applications
There are a lot of Microchip Technology DSPIC33EP256MC506-I/MR Microcontroller applications.
- Traditional industrial transformation
- Mobile computers
- Smart highways (navigation, traffic control, information monitoring and car service)
- Heater/Fan
- Mice
- Air fryers
- Computers and laptops-video calling, email, blogging
- Fire detection & safety devices
- Hand-held metering systems
- Torpedo guidance
