DSPIC33EP256MU806-E/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100, dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| HTS Code | 8542.31.00.01 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256MU806 |
| Pin Count | 64 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 12K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
| Supply Current-Max | 120mA |
| Bit Size | 16 |
| Data Converter | A/D 24x10/12b |
| Has ADC | YES |
| DMA Channels | YES |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 9 |
| Address Bus Width | 14 |
| ROM (words) | 87381 |
| On Chip Program ROM Width | 24 |
| External Data Bus Width | 8 |
| Format | FLOATING-POINT |
| Height Seated (Max) | 1mm |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP256MU806-E/MR Overview
For space savings, it is available in the 64-VFQFN Exposed Pad package. This is mounted using the Surface Mount method. A package of Tube contains it. It is equipped with a dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~125°C TA. It has a type of program memory of FLASH. There are 51 I/Os on it. It has a base part number of DSPIC33EP256MU806 that can be used to find other components that are comparable. QUAD is the position of its terminals on the board. 64 terminations are present in it. The Automotive, AEC-Q100, dsPIC? 33EP series contains this electrical component. The 3.3V supply voltage enables high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 64 pins. Total number of pins is 64. Subcategory Digital Signal Processors includes this component. 120mA is the maximum supply current. It performs extremely well at a frequency of 60MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. There are 9 timers/counters. There is an oscillator type Internal used in this circuit.
DSPIC33EP256MU806-E/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MU806-E/MR Applications
There are a lot of Microchip Technology DSPIC33EP256MU806-E/MR Microcontroller applications.
- Petrochemical
- Smart highways (navigation, traffic control, information monitoring and car service)
- Hand-held metering systems
- Information appliances (networking of household appliances)
- Microwave ovens
- Toys
- Temperature sensing and controlling devices
- 3D printers
- Fax machines
- Measuring revolving objects
