DSPIC33EP256MU806-E/PT
| Parameters | |
|---|---|
| Data Converter | A/D 24x10/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Format | FLOATING-POINT |
| Number of ADC Channels | 24 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 4 |
| Number of USB Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tray |
| Published | 2009 |
| Series | Automotive, AEC-Q100, dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256MU806 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 280kB |
| Oscillator Type | Internal |
| Number of I/O | 51 |
| RAM Size | 12K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
DSPIC33EP256MU806-E/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. You can find it in the package of Tray. The device runs in dsPIC core processor. During work, the temperature should remain at -40°C~125°C TA. The type of memory it uses is FLASH. There are 51 I/Os on the board. A comparable component can be found by using the base part number DSPIC33EP256MU806. The terminals of this device are located at QUAD. Currently, it consists of 64 terminationals. An electrical component such as this is included in the series Automotive, AEC-Q100, dsPIC? 33EP. As a result of the 3.3V supply voltage, high efficiency is possible. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. A number of 64 pins are used to construct it. This device has a total of 64 pins. It is one of the components included in Digital Signal Processors. The devices have a memory size of 280kB that can be used to store programs and data. Working at a frequency of 60MHz results in excellent efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. 9 timer/counters are present. Using oscillator type Internal makes it work.
DSPIC33EP256MU806-E/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MU806-E/PT Applications
There are a lot of Microchip Technology DSPIC33EP256MU806-E/PT Microcontroller applications.
- Blenders
- Equipment control
- Entertainment-radios, CD players, televisions
- Instrument control
- Torpedo guidance
- Dryers
- Routers
- Mobile computers
- Toys
- Answering machines
