Parameters |
Factory Lead Time |
1 Week |
Contact Plating |
Tin |
Mounting Type |
Surface Mount |
Package / Case |
64-TQFP |
Surface Mount |
YES |
Number of Pins |
64 |
Operating Temperature |
-40°C~85°C TA |
Packaging |
Tray |
Published |
2010 |
Series |
dsPIC™ 33EP |
JESD-609 Code |
e3 |
Part Status |
Active |
Moisture Sensitivity Level (MSL) |
3 (168 Hours) |
Number of Terminations |
64 |
Subcategory |
Digital Signal Processors |
Technology |
CMOS |
Terminal Position |
QUAD |
Terminal Form |
GULL WING |
Peak Reflow Temperature (Cel) |
260 |
Supply Voltage |
3.3V |
Terminal Pitch |
0.5mm |
Frequency |
60MHz |
Time@Peak Reflow Temperature-Max (s) |
40 |
Base Part Number |
DSPIC33EP256MU806 |
Pin Count |
64 |
Operating Supply Voltage |
3.3V |
Supply Voltage-Max (Vsup) |
3.6V |
Interface |
CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
Memory Size |
256kB |
Oscillator Type |
Internal |
Number of I/O |
51 |
Nominal Supply Current |
33mA |
RAM Size |
12K x 16 |
Memory Type |
FLASH, RAM |
Voltage - Supply (Vcc/Vdd) |
3V~3.6V |
uPs/uCs/Peripheral ICs Type |
MICROCONTROLLER |
Core Processor |
dsPIC |
Peripherals |
Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
Program Memory Type |
FLASH |
Core Size |
16-Bit |
Program Memory Size |
256KB 85.5K x 24 |
Connectivity |
CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
Bit Size |
16 |
Data Converter |
A/D 24x10/12b |
Watchdog Timer |
Yes |
Has ADC |
YES |
DMA Channels |
YES |
Data Bus Width |
16b |
PWM Channels |
YES |
Number of Timers/Counters |
9 |
Address Bus Width |
16b |
Density |
2 Mb |
Number of Programmable I/O |
53 |
Number of ADC Channels |
24 |
Number of I2C Channels |
2 |
Number of SPI Channels |
4 |
Number of USB Channels |
1 |
Height |
1.05mm |
Length |
10mm |
Width |
10mm |
Radiation Hardening |
No |
REACH SVHC |
No SVHC |
RoHS Status |
ROHS3 Compliant |
Lead Free |
Lead Free |
DSPIC33EP256MU806-I/PT Overview
For the purpose of saving space, it is available in the 64-TQFP package. This is mounted using the Surface Mount method. In the package Tray, it is included. Devices with dsPIC core processors are available. During work, the temperature should remain at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 51 I/Os are present. In order to find similar components, it has a base part number of DSPIC33EP256MU806. The terminals of this device are set to QUAD. A 64 termination is contained within it. There are a number of electrical components in the dsPIC? 33EP series, including this one. As a result of the 3.3V supply voltage, high efficiency is possible. The type of memory used for data storage is FLASH, RAM. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. The structure is constructed from 64 pins. It is equipped with 64 pins in total. In Digital Signal Processors, this component is included. Data and programs can be stored on the devices with a memory size of 256kB. At a frequency of 60MHz, it can achieve excellent efficiency. The supply voltage of 3.3V's adaptability can be fully utilised by designers. The number of timers and counters is 9. A chip with 53 programmable inputs/outputs is available. Using an oscillator type Internal, it operates.
DSPIC33EP256MU806-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MU806-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP256MU806-I/PT Microcontroller applications.
- Computers and laptops-video calling, email, blogging
- Binding machines
- Digital cameras
- Computed Tomography (CT scan)
- Switches
- Teletext terminals
- Nintendo
- Hand-held metering systems
- Computer/laptop
- Digital set-top boxes