DSPIC33EP256MU810-I/PF
| Parameters | |
|---|---|
| Number of I2C Channels | 2 |
| Number of SPI Channels | 4 |
| Number of USB Channels | 1 |
| Height | 1.05mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP256MU810 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 256kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 12K x 16 |
| Memory Type | FLASH, RAM |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 256KB 85.5K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 2 Mb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 12 |
DSPIC33EP256MU810-I/PF Overview
Due to the benefits of saving space, it is available in the 100-TQFP package. The way of Surface Mount is used to mount it. Package Tray contains it. There is a dsPIC as core processor in this device. When working, it is recommended that the temperature be kept at -40°C~85°C TA. Its type of program memory is FLASH. 83 I/Os are present on the device. A component with the same part number as DSPIC33EP256MU810 can be compared to other similar components. A QUAD position is assigned to its terminals. Currently, it consists of 100 terminationals. There are a number of electrical components in the dsPIC? 33EP series, including this one. Because of the 3.3V voltage of the supply, high efficiency can be achieved. As a storage type for data, FLASH, RAM is used. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. A number of 100 pins are used to construct it. Total number of pins is 100. It belongs to the subcategory Digital Signal Processors. It is possible to store programs and data on the devices, as they have a memory size of 256kB. Using a frequency of 60MHz, it is very efficient. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are 9 timers/counters. An oscillator type Internal is required for it to work.
DSPIC33EP256MU810-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP256MU810-I/PF Applications
There are a lot of Microchip Technology DSPIC33EP256MU810-I/PF Microcontroller applications.
- Industrial robot
- Toasters
- Broadband technology, video and voice processing
- Process control devices
- Printers
- 3D printers
- Christmas lights
- Firewalls
- Kindle
- DVD\DV\MP3 players
