banner_page

DSPIC33EP256MU814-I/PH

256KB 85.5K x 24 FLASH dsPIC 16-Bit Microcontroller dsPIC? 33EP Series DSPIC33EP256MU814 3.3V 144-TQFP


  • Manufacturer: Microchip Technology
  • Nocochips NO: 536-DSPIC33EP256MU814-I/PH
  • Package: 144-TQFP
  • Datasheet: PDF
  • Stock: 339
  • Description: 256KB 85.5K x 24 FLASH dsPIC 16-Bit Microcontroller dsPIC? 33EP Series DSPIC33EP256MU814 3.3V 144-TQFP (Kg)

Details

Tags

Parameters
Factory Lead Time 1 Week
Mounting Type Surface Mount
Package / Case 144-TQFP
Surface Mount YES
Operating Temperature -40°C~85°C TA
Packaging Tray
Published 2012
Series dsPIC™ 33EP
JESD-609 Code e3
Part Status Active
Moisture Sensitivity Level (MSL) 3 (168 Hours)
Number of Terminations 144
ECCN Code 3A001.A.3
Terminal Finish Matte Tin (Sn) - annealed
HTS Code 8542.31.00.01
Subcategory Digital Signal Processors
Technology CMOS
Terminal Position QUAD
Terminal Form GULL WING
Peak Reflow Temperature (Cel) 260
Supply Voltage 3.3V
Terminal Pitch 0.4mm
Time@Peak Reflow Temperature-Max (s) 40
Base Part Number DSPIC33EP256MU814
Pin Count 144
JESD-30 Code S-PQFP-G144
Supply Voltage-Max (Vsup) 3.6V
Power Supplies 3.3V
Supply Voltage-Min (Vsup) 3V
Interface CAN, I2C, IrDA, LIN, SPI, UART, USART, USB
Memory Size 280kB
Oscillator Type Internal
Number of I/O 122
Speed 60 MIPs
RAM Size 12K x 16
Voltage - Supply (Vcc/Vdd) 3V~3.6V
uPs/uCs/Peripheral ICs Type MICROCONTROLLER
Core Processor dsPIC
Peripherals Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT
Program Memory Type FLASH
Core Size 16-Bit
Program Memory Size 256KB 85.5K x 24
Connectivity CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG
Supply Current-Max 120mA
Bit Size 16
Data Converter A/D 32x10b/12b
Watchdog Timer Yes
Has ADC YES
DMA Channels YES
Data Bus Width 16b
PWM Channels YES
DAC Channels NO
Number of Timers/Counters 9
Address Bus Width 14
ROM (words) 87381
On Chip Program ROM Width 24
Max Frequency 60MHz
Format FLOATING-POINT
Height Seated (Max) 1.2mm
Length 16mm
Radiation Hardening No
RoHS Status ROHS3 Compliant

DSPIC33EP256MU814-I/PH Overview


It is available in the 144-TQFP package for the benefit of saving space. Using Surface Mount, it is mounted. Package Tray contains it. With a processor of dsPIC cores, the device is powered. Working at -40°C~85°C TA temperature is recommended. The type of memory it uses is FLASH. A total of 122 I/Os are present. It has a part number of DSPIC33EP256MU814 that can be used to locate similar components. The position of the device is QUAD at terminal. In this case, there are 144 terminationals. The dsPIC? 33EP series contains this electrical component. As a result of the 3.3V supply voltage, high efficiency is possible. UPs/UCS/Peripheral ICs of this gadget are MICROCONTROLLER in order to monitor their performance. In total, it has 144 pins. It belongs to the subcategory Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 280kB. There is a maximum current supply of 120mA. It is powered by a 3.3V?source. It appears that there are 9 timers/counters in use. It operates at a maximum frequency of 60MHz. During normal operation, the supply voltage (Vsup) should be kept above 3V. Using an oscillator type Internal, it operates.

DSPIC33EP256MU814-I/PH Features


144-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory

DSPIC33EP256MU814-I/PH Applications


There are a lot of Microchip Technology DSPIC33EP256MU814-I/PH Microcontroller applications.

  • ECG machine
  • Telephone sets
  • Monitoring-temperature level, oil level, speed, distance, acceleration
  • X-ray
  • Heater/Fan
  • Firewalls
  • Virtual reality VR robots
  • Refrigerators
  • DVD\DV\MP3 players
  • Hand-held metering systems

Write a review

Note: HTML is not translated!
    Bad           Good