DSPIC33EP32GP502-E/SS
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Number of Pins | 28 |
| Operating Temperature | -40°C~125°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | Automotive, AEC-Q100, dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP32GP502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 10.7K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP32GP502-E/SS Overview
As a result, it is available in the 28-SSOP (0.209, 5.30mm Width) package. It is mounted using the way of Surface Mount. In the package Tube, it is included. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~125°C TA while working. Its type of program memory is FLASH. 21 I/Os are present on the device. In order to find similar components, it has a base part number of DSPIC33EP32GP502. The terminals are positioned at DUAL. There are a total of 28 terminations in it. The Automotive, AEC-Q100, dsPIC? 33EP series contains this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. The mounting of this device is carried out following the method of Surface Mount. There are a total of 28 pins on it. This is a component included in Digital Signal Processors. The devices have a maximum memory size of 32kB that can be used to store programs and data. This device achieves excellent efficiency at frequencies of 60MHz. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. The number of timers and counters is 5. The oscillator type Internal is used to operate the device.
DSPIC33EP32GP502-E/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP32GP502-E/SS Applications
There are a lot of Microchip Technology DSPIC33EP32GP502-E/SS Microcontroller applications.
- Auto-breaking system
- Ipad
- Traditional industrial transformation
- Laminators
- Answering machines
- Fire detection & safety devices
- ECG machine
- X-ray
- Tape drives
- Smoke alarms
