DSPIC33EP32GP502-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP32GP502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 10.7K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP32GP502-I/MM Overview
There is a 28-VQFN Exposed Pad package available to save space. It is mounted using the way of Surface Mount. It comes in the package?of a Tube. The device runs in dsPIC core processor. It is important to keep the temperature at -40°C~85°C TA while working. It has a type of program memory of FLASH. 21 I/Os have been provided by the device. Based on its base part number of DSPIC33EP32GP502, other similarly-sized components can be found. This device has terminals at QUAD. It has 28 terminationals. The dsPIC? 33EP series includes this electrical component. Because the supply voltage is 3.3V, high efficiency can be achieved. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. The structure is composed of 28 pins. There are a total of 28 pins on it. Subcategory Digital Signal Processors includes this component. In the device, there is a memory capacity of 32kB which may be used to store programs and data. It performs extremely well at a frequency of 70MHz. 3.3V offers full adaptability and voltage supply when it is employed by designers. In total, there are 5 timers and counters. An oscillator type Internal is required for it to work.
DSPIC33EP32GP502-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP32GP502-I/MM Applications
There are a lot of Microchip Technology DSPIC33EP32GP502-I/MM Microcontroller applications.
- Television
- Broadband technology, video and voice processing
- Fax machines
- Embedded gateways
- Volt meter
- Routers
- Calculator
- ECG machine
- Process control devices
- DCS control intelligent sensor
