DSPIC33EP32MC202-I/SP
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Through Hole |
| Package / Case | 28-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Base Part Number | DSPIC33EP32MC202 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 10.7K x 24 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Length | 34.671mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP32MC202-I/SP Overview
A space-saving advantage is that it is included in the 28-DIP (0.300, 7.62mm) package. Using Through Hole, it is mounted. It comes in a Tube package. dsPIC core processor is present on the device. Working at -40°C~85°C TA temperature is recommended. FLASH is the type of program memory used by it. 21 I/Os can be found on it. A comparable component can be found by using the base part number DSPIC33EP32MC202. At DUAL, it has its terminals. As far as terminations are concerned, there are 28 terminations present. An electrical component such as this is included in the series dsPIC? 33EP. As a result of the 3.3V supply voltage, high efficiency is possible. MICROCONTROLLER is this gadget's uPs/uC/peripheral IC. For its construction, 28 pins are used. Total number of pins is 28. Digital Signal Processors contains this component. The devices have a memory size of 32kB that can be used to store programs and data. It is highly efficient when it works at a frequency of 70MHz. The supply voltage of 3.3V's adaptability can be fully utilised by designers. The number of timers and counters is 5. Using an oscillator type Internal, it operates.
DSPIC33EP32MC202-I/SP Features
28-DIP (0.300, 7.62mm) package
Mounting type of Through Hole
Digital Signal Processors subcategory
DSPIC33EP32MC202-I/SP Applications
There are a lot of Microchip Technology DSPIC33EP32MC202-I/SP Microcontroller applications.
- Virtual reality VR robots
- Auto-breaking system
- Tape drives
- Smoke alarms
- Teletext terminals
- Hand-held metering systems
- Entertainment products
- Microwave ovens
- Computer/laptop
- Switches
