DSPIC33EP32MC502-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 28 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP32MC502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 10.7K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP32MC502-I/MM Overview
It is available in the 28-VQFN Exposed Pad package for the benefit of saving space. The way of Surface Mount is used to mount it. This item can be found in package Tube. It is equipped with a dsPIC core processor. Maintain a temperature of -40°C~85°C TA while working. Memory type FLASH is used for program memory. There are 21 I/Os on it, which makes it a very simple device. To find equivalent components, use its DSPIC33EP32MC502 base part number. The terminals of this device are located at QUAD. A 28 termination is contained within it. The electrical component is part of the series dsPIC? 33EP. By using a 3.3V voltage supply, high efficiency is possible. The gadget has MICROCONTROLLER for its uPs, uC, and peripheral ICs. There are 28 pins used in the construction of this device. In total, it has 28 pins. It belongs to the subcategory Digital Signal Processors. Data and programs can be stored on the devices with a memory size of 32kB. Using a frequency of 70MHz, it is very efficient. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. The number of timers and counters is 5. An oscillator type Internal is required for it to work.
DSPIC33EP32MC502-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP32MC502-I/MM Applications
There are a lot of Microchip Technology DSPIC33EP32MC502-I/MM Microcontroller applications.
- Guidance-GPS
- Measuring revolving objects
- Blood pressure monitors
- Removable disks
- Multi-meter
- Pacemakers (used to control abnormal heart rhythm)
- Toys
- Volt meter
- Mobile computers
- Oscilloscopes
