DSPIC33EP32MC502-I/SS
| Parameters | |
|---|---|
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 32KB 10.7K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| ROM (words) | 10922 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 2048 |
| Height Seated (Max) | 2mm |
| Length | 10.2mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-SSOP (0.209, 5.30mm Width) |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| ECCN Code | 3A991.A.2 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP32MC502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 32kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 2K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
DSPIC33EP32MC502-I/SS Overview
For the purpose of saving space, it is available in the 28-SSOP (0.209, 5.30mm Width) package. The way of mounting it is Surface Mount. Package Tube contains it. A core processor of dsPIC is present in the device. During work, the temperature should remain at -40°C~85°C TA. The type of memory it uses is FLASH. There are 21 I/Os on it. To find equivalent components, use its DSPIC33EP32MC502 base part number. The position of the device is DUAL at terminal. In this case, there are 28 terminationals. The electrical component is part of the series dsPIC? 33EP. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. uPs/uCs/Peripheral IC for this gadget is MICROCONTROLLER. A number of 28 pins are used to construct it. There are 28 pins on it. In Digital Signal Processors, this component is included. The devices have a maximum memory size of 32kB that can be used to store programs and data. At a frequency of 70MHz, it can achieve excellent efficiency. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. 5 timer/counters are present. Internal is the oscillator type it uses.
DSPIC33EP32MC502-I/SS Features
28-SSOP (0.209, 5.30mm Width) package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP32MC502-I/SS Applications
There are a lot of Microchip Technology DSPIC33EP32MC502-I/SS Microcontroller applications.
- ECG machine
- Ipad
- Virtual reality VR robots
- Electronic jamming systems
- X-ray
- Digital cameras
- Automatic control
- Fire detection & safety devices
- Routers
- Electromechanical control
