DSPIC33EP512GM604-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP512GM604 |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 11mA |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 18x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Address Bus Width | 16b |
| Density | 4 Mb |
| Format | FLOATING-POINT |
| Number of UART Channels | 4 |
| Number of ADC Channels | 18 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Number of USB Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP512GM604-I/PT Overview
There is a 44-TQFP package available to save space. This is mounted using the Surface Mount method. It is available in the Tray package. With a processor of dsPIC cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. There is FLASH program memory in it. There are 35 I/Os on the board. To find comparable components, use the DSPIC33EP512GM604 base part number. QUAD is the position of its terminals on the board. In this case, there are 44 terminationals. It is a member of the dsPIC? 33EP series of electrical components. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. 44 pins are used to construct it. It is one of the components included in Digital Signal Processors. In the device, there is a memory capacity of 512kB which may be used to store programs and data. At a frequency of 70MHz, it exhibits excellent efficiency. 13 timers/counters are in use. Normal operation requires a supply voltage (Vsup) above 3V. Using an oscillator type Internal, it operates.
DSPIC33EP512GM604-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512GM604-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP512GM604-I/PT Microcontroller applications.
- Walkie talkies
- Coffee machines
- Fax machines
- Copiers
- X-ray
- Routers
- Mice
- Binding machines
- Magnetic resonance imaging (MRI)
- Removable disks
