DSPIC33EP512GM706-I/MR
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-VFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP512GM706 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 11mA |
| Speed | 70 MIPs |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 30x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Address Bus Width | 16b |
| Density | 4 Mb |
| Max Frequency | 60MHz |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of UART Channels | 4 |
| Number of ADC Channels | 30 |
| Number of External Interrupts | 5 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Number of USB Channels | 1 |
| Height | 950μm |
| Length | 9mm |
| Width | 9mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP512GM706-I/MR Overview
Due to its space-saving qualities, it is available in the 64-VFQFN Exposed Pad package. It is mounted using the way of Surface Mount. You can find it in the package of Tube. Devices with dsPIC core processors are available. Work should be performed at a temperature of -40°C~85°C TA. In terms of its program memory type, it is FLASH. There are 53 I/Os on it, which makes it a very simple device. Other components that are comparable to it have the base part number DSPIC33EP512GM706. At QUAD, its terminals are located. A 64 termination is contained within it. This electrical component is part of the dsPIC? 33EP series. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. 64 pins are used to construct it. In the subcategory of Digital Signal Processors, this component is included. In order to store data and programs, the devices have a memory size of 512kB. A total of 13 timers/counters have been set up. 60MHz is the maximum frequency at which the device operates. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. The oscillator type Internal is used to operate the device.
DSPIC33EP512GM706-I/MR Features
64-VFQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512GM706-I/MR Applications
There are a lot of Microchip Technology DSPIC33EP512GM706-I/MR Microcontroller applications.
- Torpedo guidance
- Smartphone
- Safety -airbags, automatic braking system (ABS)
- Information appliances (networking of household appliances)
- Entertainment products
- Home appliances
- Hand-held metering systems
- Current meter
- Robots
- Coffee machines
