DSPIC33EP512GM706-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP512GM706 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, SPI, UART |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| Nominal Supply Current | 11mA |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 30x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Address Bus Width | 16b |
| Density | 4 Mb |
| Boundary Scan | YES |
| Low Power Mode | YES |
| Format | FLOATING-POINT |
| Integrated Cache | NO |
| Number of UART Channels | 4 |
| Number of ADC Channels | 30 |
| Number of External Interrupts | 5 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
| Number of USB Channels | 1 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP512GM706-I/PT Overview
Due to the benefits of saving space, it is available in the 64-TQFP package. The way of mounting it is Surface Mount. It is available in the Tray package. There is a dsPIC as core processor in this device. When working, the temperature should be kept at -40°C~85°C TA. It has a type of program memory of FLASH. 53 I/Os are present on the device. Other components that are comparable to it have the base part number DSPIC33EP512GM706. At QUAD, it has its terminals. 64 terminations are present in it. The electrical component is part of the series dsPIC? 33EP. Because the supply voltage is 3.3V, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. 64 pins are used to construct it. This is a component included in Digital Signal Processors. Using the devices' 512kB memory size, you can store programs and data. Using a frequency of 70MHz, it is very efficient. The supply voltage of 3.3V's adaptability can be fully utilised by designers. The number of timers and counters is 13. Using an oscillator type of Internal, it works.
DSPIC33EP512GM706-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512GM706-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP512GM706-I/PT Microcontroller applications.
- 3D printers
- Set-top boxes
- Magnetic resonance imaging (MRI)
- Air fryers
- Paper shredders
- Automatic staplers
- Electrocardiogram (EKG)
- Guidance-GPS
- Robots
- Oscilloscopes
