DSPIC33EP512GM710-I/BG
| Parameters | |
|---|---|
| Number of USB Channels | 1 |
| Height | 850μm |
| Length | 10mm |
| Width | 10mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 121-TFBGA |
| Surface Mount | YES |
| Number of Pins | 121 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e1 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 121 |
| Terminal Finish | Tin/Silver/Copper (Sn/Ag/Cu) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | BOTTOM |
| Terminal Form | BALL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | DSPIC33EP512GM710 |
| Qualification Status | Not Qualified |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | I2C, SPI, UART |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 85 |
| Nominal Supply Current | 11mA |
| RAM Size | 48K x 8 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, I2S, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 49x10b/12b |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 13 |
| Address Bus Width | 16b |
| Density | 4 Mb |
| Format | FLOATING-POINT |
| Number of UART Channels | 4 |
| Number of ADC Channels | 49 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 3 |
DSPIC33EP512GM710-I/BG Overview
There is an option to purchase it in the 121-TFBGA package, which saves space. Surface Mount is the way to mount it. This item can be found in package Tray. The device runs in dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. There are 85 I/Os on it. A component with the same part number as DSPIC33EP512GM710 can be compared to other similar components. At BOTTOM, it has its terminals. It consists of 121 terminationals. It is a member of the dsPIC? 33EP series of electrical components. Using the 3.3V supply voltage allows for high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. It is constructed using 121 pins. It is one of the components included in Digital Signal Processors. The devices have a maximum memory size of 512kB that can be used to store programs and data. The system is highly efficient when working at a frequency of 70MHz. 13 timer/counters are present. During normal operation, the supply voltage (Vsup) should be kept above 3V. An oscillator of type Internal is used.
DSPIC33EP512GM710-I/BG Features
121-TFBGA package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512GM710-I/BG Applications
There are a lot of Microchip Technology DSPIC33EP512GM710-I/BG Microcontroller applications.
- DCS control intelligent sensor
- Robots
- Auto-breaking system
- Hard drives
- Process control devices
- Traditional industrial transformation
- Data acquisition and control
- Copiers
- Switches
- Dialysis machines (performs function of liver)
