DSPIC33EP512MU810-I/PF
| Parameters | |
|---|---|
| Number of ADC Channels | 32 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 4 |
| Number of Ethernet Channels | 1 |
| Height | 1mm |
| Length | 14mm |
| Width | 14mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2008 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.5mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP512MU810 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 536kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| RAM Size | 24K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Density | 4.2 Mb |
| Format | FLOATING-POINT |
DSPIC33EP512MU810-I/PF Overview
There is a 100-TQFP package available to save space. A Surface Mount mounting method is used. A package of Tray contains it. It is equipped with a dsPIC core processor. When working, it is recommended that the temperature be kept at -40°C~85°C TA. FLASH has been assigned to it as a program memory. It has a number of 83I/Os. It has a part number of DSPIC33EP512MU810 that can be used to locate similar components. At QUAD, its terminals are located. This circuit consists of 100 terminationals. The electrical component is part of the series dsPIC? 33EP. Because of the 3.3V voltage of the supply, high efficiency can be achieved. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. A total of 100 pins are used in its construction. On it, there are 100 pins. This is a component included in Digital Signal Processors. In the device, there is a memory capacity of 536kB which may be used to store programs and data. The system is highly efficient when working at a frequency of 60MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. A total of 9 timers/counters are present. Internal is the oscillator type it uses.
DSPIC33EP512MU810-I/PF Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512MU810-I/PF Applications
There are a lot of Microchip Technology DSPIC33EP512MU810-I/PF Microcontroller applications.
- Missile control
- X-ray
- Copiers
- Hearing aids
- Smoke alarms
- Xbox
- Fax machines
- Tape drives
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Broadband technology, video and voice processing
