DSPIC33EP512MU810-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Contact Plating | Tin |
| Mounting Type | Surface Mount |
| Package / Case | 100-TQFP |
| Surface Mount | YES |
| Number of Pins | 100 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 100 |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP512MU810 |
| Pin Count | 100 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART, USB |
| Memory Size | 512kB |
| Oscillator Type | Internal |
| Number of I/O | 83 |
| Nominal Supply Current | 33mA |
| RAM Size | 24K x 16 |
| Memory Type | FLASH, RAM |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Number of Bits | 16 |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 512KB 170K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART, USB OTG |
| Bit Size | 16 |
| Data Converter | A/D 32x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 9 |
| Address Bus Width | 16b |
| Density | 4 Mb |
| Number of ADC Channels | 32 |
| Number of PWM Channels | 12 |
| Number of I2C Channels | 2 |
| Number of SPI Channels | 4 |
| Number of Ethernet Channels | 1 |
| Height | 1mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP512MU810-I/PT Overview
For the purpose of saving space, it is available in the 100-TQFP package. Using Surface Mount, it is mounted. You can find it in the package of Tray. A core processor of dsPIC is present in the device. When working, the temperature should be kept at -40°C~85°C TA. The type of memory in which this program is stored is FLASH. A total of 83 I/Os are available on this device. A comparable component can be found by using the base part number DSPIC33EP512MU810. QUAD is the position of its terminals on the board. 100 terminationals are present. The dsPIC? 33EP series includes this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. For data storage, FLASH, RAM is used as its memory type. This gadget has MICROCONTROLLER as its uPs/uCs/Peripheral IC. For its construction, 100 pins are used. This device has a total of 100 pins. It falls under the category of Digital Signal Processors. The devices have a maximum memory size of 512kB that can be used to store programs and data. When working at a frequency of 60MHz it is able to achieve excellent efficiency. Using 3.3V's adaptability as a supply voltage allows designers to maximize its use. There are currently 9 timers/counters set up on the system. The oscillator type Internal is used to operate the device.
DSPIC33EP512MU810-I/PT Features
100-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP512MU810-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP512MU810-I/PT Microcontroller applications.
- Scanners
- Fax machines
- ECG machine
- DCS control intelligent sensor
- Wastewater treatment
- Smart instruments
- Smart highways (navigation, traffic control, information monitoring and car service)
- Entertainment products
- Blood pressure monitors
- Paper shredders
