DSPIC33EP64GP504-I/PT
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64GP504 |
| Pin Count | 44 |
| Supply Voltage-Max (Vsup) | 3.6V |
| Power Supplies | 3.3V |
| Supply Voltage-Min (Vsup) | 3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Nominal Supply Current | 16mA |
| Speed | 70 MHz |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Address Bus Width | 16b |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 9 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 60MHz |
DSPIC33EP64GP504-I/PT Overview
There is a 44-TQFP package available to save space. Surface Mount is the way to mount it. It is available in the Tray package. There is a dsPIC as core processor in this device. Work should be performed at a temperature of -40°C~85°C TA. FLASH is the type of program memory used by it. 35 I/Os have been provided by the device. To find equivalent components, use its DSPIC33EP64GP504 base part number. At QUAD, it has its terminals. 44 terminationals are present. dsPIC? 33EP is the series number of this electrical component. This is due to the fact that the supply voltage is 3.3V, resulting in high efficiency. It has uPs/uCs/Peripheral IC - MICROCONTROLLER. For its construction, 44 pins are used. It is equipped with 44 pins in total. This component is a part of Digital Signal Processors. Using the devices' 64kB memory size, you can store programs and data. Powered by a 3.3V source. Working at a frequency of 60MHz results in excellent efficiency. There are currently 5 timers/counters set up on the system. In order to maintain normal operation, the supply voltage (Vsup) should be maintained above 3V. The oscillator type Internal is used to operate the device.
DSPIC33EP64GP504-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64GP504-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP64GP504-I/PT Microcontroller applications.
- Virtual reality VR robots
- Answering machines
- Plant factories (special plant factories, soilless cultivation technology, smart seed engineering)
- Xbox
- Walkie talkies
- X-ray
- Telephone sets
- Copiers
- Refrigerators
- Robots
