DSPIC33EP64MC206-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 64-TQFP |
| Surface Mount | YES |
| Number of Pins | 64 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 64 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64MC206 |
| Pin Count | 64 |
| Operating Supply Voltage | 3.3V |
| Interface | I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 53 |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 16x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 16 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 12mm |
| Width | 12mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP64MC206-I/PT Overview
To save space, it is included in the 64-TQFP package. Using Surface Mount, it is mounted. It is available in the Tray package. It is equipped with a dsPIC core processor. When working, the temperature should be kept at -40°C~85°C TA. FLASH is its program memory type. A total of 53 I/Os are present. It has a base part number of DSPIC33EP64MC206 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. There are a total of 64 terminations in it. dsPIC? 33EP is the series number of this electrical component. The supply voltage of 3.3V allows for high efficiency. In this gadget, MICROCONTROLLER is the device's uPs/uCs/Peripheral IC. There are 64 pins used in the construction of this device. Total number of pins is 64. In the subcategory of Digital Signal Processors, this component is included. A device with a memory size of 64kB can store programs and data. The system is highly efficient when working at a frequency of 70MHz. In order to fully utilize its adaptability, designers can utilize the supply voltage of 3.3V in their designs. There are currently 5 timers/counters set up on the system. An oscillator type Internal is required for it to work.
DSPIC33EP64MC206-I/PT Features
64-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64MC206-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP64MC206-I/PT Microcontroller applications.
- Petrochemical
- Dryers
- Pacemakers (used to control abnormal heart rhythm)
- Glucose monitoring systems (for Type 1 Diabetes)
- Electrocardiogram (EKG)
- Scanners
- Instrument control
- Accu-check
- Mobile computers
- Graphic terminals
