DSPIC33EP64MC502-I/MM
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 28-VQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 28 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 28 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64MC502 |
| Pin Count | 28 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 21 |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 6x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| Number of Timers/Counters | 5 |
| Format | FLOATING-POINT |
| Number of ADC Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 950μm |
| Length | 6mm |
| Width | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP64MC502-I/MM Overview
A space-saving advantage is that it is included in the 28-VQFN Exposed Pad package. This is mounted using the Surface Mount method. It comes in a Tube package. With a processor of dsPIC cores, the device is powered. Work should be performed at a temperature of -40°C~85°C TA. It has a type of program memory of FLASH. There are 21 I/Os on it, which makes it a very simple device. To find comparable components, use the DSPIC33EP64MC502 base part number. At QUAD, its terminals are located. There are a total of 28 terminations in it. There are a number of electrical components in the dsPIC? 33EP series, including this one. The 3.3V supply voltage enables high efficiency. MICROCONTROLLER is the uPs/uCs/Peripheral IC chip in this gadget. For its construction, 28 pins are used. There are 28 pins on it. This component is a part of Digital Signal Processors. The devices have a memory size of 64kB that can be used to store programs and data. The system is highly efficient when working at a frequency of 70MHz. While employing 3.3V, designers can maximize its supply voltage adaptability. 5 timers/counters are in use. Using oscillator type Internal makes it work.
DSPIC33EP64MC502-I/MM Features
28-VQFN Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64MC502-I/MM Applications
There are a lot of Microchip Technology DSPIC33EP64MC502-I/MM Microcontroller applications.
- Paper shredders
- Answering machines
- Toasters
- Walkie talkies
- Scanners
- DDC control
- Light sensing & controlling devices
- Oil and gas
- Information appliances (networking of household appliances)
- Home appliances
