DSPIC33EP64MC504-I/PT
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-TQFP |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tray |
| Published | 2011 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| Terminal Finish | Matte Tin (Sn) - annealed |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.8mm |
| Frequency | 60MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64MC504 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| Speed | 70 MHz |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| Number of Timers/Counters | 5 |
| Density | 512 kb |
| Format | FLOATING-POINT |
| Number of ADC Channels | 9 |
| Number of PWM Channels | 6 |
| Number of I2C Channels | 2 |
| Height | 1.05mm |
| Length | 10mm |
| Width | 10mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
DSPIC33EP64MC504-I/PT Overview
As a result, it is available in the 44-TQFP package. The way of mounting it is Surface Mount. A package of Tray contains it. A core processor of dsPIC is present in the device. Work should be done at -40°C~85°C TA. FLASH has been assigned to it as a program memory. There are 35 I/Os on it. A component with the same part number as DSPIC33EP64MC504 can be compared to other similar components. At QUAD, its terminals are located. There are a total of 44 terminations in it. It is a member of the dsPIC? 33EP series of electrical components. Because of the 3.3V voltage of the supply, high efficiency can be achieved. The gadget has MICROCONTROLLER as its uPs/uCs/peripheral IC. There are 44 pins used in the construction of this device. A total of 44 pins are attached to it. Digital Signal Processors contains this component. In order to store data and programs, the devices have a memory size of 64kB. Working at a frequency of 60MHz results in excellent efficiency. When 3.3V is employed, designers can fully utilize its adaptability and supply voltage. There are currently 5 timers/counters set up on the system. Using an oscillator type of Internal, it works.
DSPIC33EP64MC504-I/PT Features
44-TQFP package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64MC504-I/PT Applications
There are a lot of Microchip Technology DSPIC33EP64MC504-I/PT Microcontroller applications.
- Digital set-top boxes
- Food and beverage
- Toasters
- Ipad
- Robots
- Fax machines
- Leakage current tester
- Binding machines
- Nintendo
- Washing machines
