DSPIC33EP64MC504-I/TL
| Parameters | |
|---|---|
| Factory Lead Time | 1 Week |
| Mounting Type | Surface Mount |
| Package / Case | 44-VFTLA Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 44 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2012 |
| Series | dsPIC™ 33EP |
| JESD-609 Code | e4 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 44 |
| ECCN Code | 3A001.A.3 |
| Terminal Finish | Nickel/Palladium/Gold (Ni/Pd/Au) |
| Subcategory | Digital Signal Processors |
| Technology | CMOS |
| Terminal Position | QUAD |
| Peak Reflow Temperature (Cel) | 260 |
| Supply Voltage | 3.3V |
| Frequency | 70MHz |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Base Part Number | DSPIC33EP64MC504 |
| Pin Count | 44 |
| Operating Supply Voltage | 3.3V |
| Supply Voltage-Max (Vsup) | 3.6V |
| Interface | CAN, I2C, IrDA, LIN, SPI, UART, USART |
| Memory Size | 64kB |
| Oscillator Type | Internal |
| Number of I/O | 35 |
| RAM Size | 4K x 16 |
| Voltage - Supply (Vcc/Vdd) | 3V~3.6V |
| uPs/uCs/Peripheral ICs Type | MICROCONTROLLER |
| Core Processor | dsPIC |
| Peripherals | Brown-out Detect/Reset, DMA, Motor Control PWM, POR, PWM, WDT |
| Program Memory Type | FLASH |
| Core Size | 16-Bit |
| Program Memory Size | 64KB 22K x 24 |
| Connectivity | CANbus, I2C, IrDA, LINbus, QEI, SPI, UART/USART |
| Bit Size | 16 |
| Data Converter | A/D 9x10b/12b |
| Watchdog Timer | Yes |
| Has ADC | YES |
| DMA Channels | YES |
| Data Bus Width | 16b |
| PWM Channels | YES |
| DAC Channels | NO |
| Number of Timers/Counters | 5 |
| On Chip Program ROM Width | 24 |
| Format | FLOATING-POINT |
| RAM (words) | 4096 |
| Height Seated (Max) | 1mm |
| Length | 6mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
DSPIC33EP64MC504-I/TL Overview
To save space, it is included in the 44-VFTLA Exposed Pad package. The way of mounting it is Surface Mount. It is available in the Tube package. Devices with dsPIC core processors are available. When working, it is recommended that the temperature be kept at -40°C~85°C TA. It has a type of program memory of FLASH. The device has 35 I/Os. It has a base part number of DSPIC33EP64MC504 that can be used to find other components that are comparable. A QUAD position is assigned to its terminals. It has 44 terminationals. Part of the dsPIC? 33EP series, this electrical component is used in a variety of applications. High efficiency is possible due to the 3.3V supply voltage. As for the uPs/uCs/peripheral ICs, this gadget has MICROCONTROLLER. A number of 44 pins are used to construct it. There are 44 pins on it. Digital Signal Processors contains this component. A device with a memory size of 64kB can store programs and data. Using a frequency of 70MHz, it is very efficient. 3.3V provides an adaptable and voltage-independent supply voltage when it is used by designers. 5 counters/timers are currently active. Using an oscillator type of Internal, it works.
DSPIC33EP64MC504-I/TL Features
44-VFTLA Exposed Pad package
Mounting type of Surface Mount
Digital Signal Processors subcategory
DSPIC33EP64MC504-I/TL Applications
There are a lot of Microchip Technology DSPIC33EP64MC504-I/TL Microcontroller applications.
- Dialysis machines (performs function of liver)
- Calculators
- Removable disks
- Glucose monitoring systems (for Type 1 Diabetes)
- Fax machines
- Aerospace navigation systems
- Monitoring-temperature level, oil level, speed, distance, acceleration
- Xbox
- Telephone sets
- Nintendo
